Buhler 2375, 2335, 2425, 2290, 2360 manual Operation

SECTION 2 - OPERATION

The operator can cancel the audible alarm and the “VOLTS” only display on the lower portion of the monitor by pressing the acknowledge/reset button. The lower portion of the monitor will revert back to its previous display based on the position of the rotary select switch, but “VOLTS” will flash in the lower portion of the monitor along with the selected display. The audible alarm will not return until the ignition switch is turned to the “OFF” position and the tractor is restarted.

High/low electrical system voltage is considered a non-critical alarm function and will not cause the electronic monitor to go into the “STOP” mode or cause the automatic shutdown to activate.

ATTENTION: It is important that the operator shut the tractor off and find out the cause of the high/low electrical system voltage indication. Take corrective action immediately to prevent damage to the electrical system.

Figure 2-114

2-85