Buhler 2335, 2425, 2290, 2375, 2360 manual Tractor Lighting, Rotary Light Switch

SECTION 2 - OPERATION

TRACTOR LIGHTING

Rotary Light Switch

The rotary light switch is a five-position switch. Rotating the switch clockwise will activate the tractor lighting as follows:

1Off

2Hazard lights

3Roadway use

4Field use

5Field use

NOTE: The rotary light switch is wired live at all times and will work with the ignition key switch in any position.

Position One - “OFF” - No lights will be lit.

Position Two - “Hazard Lights” - The two front roof-mounted amber lights, 1, and the two rear roof-mounted amber lights, 2, will flash (as will the wide transport marker lights). The red taillights, 3, on each of the rear fenders will be lit.

NOTE: When the rotary light switch is in position two, and the multifunction switch is placed in the right or left turn signal position, the front and rear roof-mounted amber warning lights will stop flashing, except for the front and rear roof-mounted warning lights on the side to which the turn is being made. The opposite front and rear mounted warning lights will remain lit, but will not flash (as will the extremity lights).

When the rotary light switch is in position two, depressing the brake pedal will cause the taillights to get brighter.

3	4
	5
2
1
	Figure 2-58

1	2
	3
	Figure 2-59

WARNING: FOR YOUR PROTECTION, USE THE HAZARD WARNING LIGHTS WHEN TRAVELING ON PUBLIC ROADS UNLESS PROHIBITED BY LAW

2-42