Buhler 2375 Optional Hydraulic Equipment, Point Hitch Description, 19 mm 3/4″ Coupler Kit P/N

SECTION 2 - OPERATION

OPTIONAL HYDRAULIC EQUIPMENT

19 mm (3/4″) Coupler Kit P/N 86010513

This kit will allow hydraulic motors that require 19 mm (3/4″) supply and return hoses and couplers, 1, to be hooked to the tractor and operated using the gray remote control circuit.

The kit also contains a case drain line, 2, for the motor if required in the application. The case drain line hooks into the existing “zero return” line on the right-hand side of the implement valve.

Operation of the gray circuit when equipped with the 19 mm (3/4″) kit is identical to operation of the circuit without the kit.

1

2

Figure 2-180

3-POINT HITCH (Optional)

3-POINT HITCH DESCRIPTION

All tractors can be equipped with a Category IV Narrow 3-point hitch which converts to a Category III hitch. The 3-point hitch can be factory or dealer installed.

The 3-point hitch is an electrohydraulic system that has an automatic position control feature to maintain implement depth as determined by the operator.

Figure 2-181

Be sure that the implements used conform to the hitch dimensions shown:

(A)51 mm (2″)

(B)45 mm (1.78″)

(C)920 mm (36.23″)

(D)51 mm (2″)

Figure 2-182

2-135