Buhler 2375, 2335, 2425, 2290, 2360 manual Electronic Monitor Acknowledge/Reset Button

SECTION 2 - OPERATION

Electronic Monitor

The electronic monitor, 1, is an LCD (Liquid Crystal Display) that is divided into two sections; an upper section, 2, and a lower section, 3.

The upper section of the monitor is dedicated to providing engine RPM readout at all times during normal tractor operation, regardless of the position of the rotary select switch.

The lower section of the monitor is dedicated to providing six different readouts, based on the position of the rotary select switch during normal tractor operation.

The electronic monitor also has an audible alarm which will call the operator’s attention to the Electronic Instrument Control System.

Electronic Monitor Acknowledge/Reset Button

The electronic monitor acknowledge/reset button is a push-button two-position momentary switch that allows the operator to acknowledge information provided by the Electronic Instrument Control System. The button is also used during the calibration procedure.

1	2
	3
	Figure 2-74

Electronic Monitor Rotary Select Switch

The electronic monitor rotary select switch is a six-position rotary switch used to select LCD readouts on the lower half of the electronic monitor.

1Electrical system voltage

2PTO speed

3Tractor ground speed

4Service interval one

5Service interval two

6Tractor accumulated hours

The rotary select switch is active at all times during normal operation of the tractor.

		Figure 2-75
	2	3
1		4
		5
		6
		Figure 2-76

2-50