Buhler 2360, 2335, 2425, 2290, 2375 manual Operation

SECTION 2 - OPERATION

1	2	3	4	5	6	7	8	9	10
11	12	13	14	15	16	17	18	19	20
									Figure 2-24

Warning Light Bar

The warning light bar provides visual indication of specific functions as follows:

1 Left Turn Signal and Flasher Indication Arrow - illuminates when the multifunction switch is placed in the left turn position (flashes), when the multifunction switch is placed in the right turn position (steady) and when the rotary light switch is in positions two or three (flashes).

2 High Beams - illuminates when the multifunction switch is pulled toward the steering column for headlight flash or high beam position.

3Air Filter Restriction - illuminates when there is 635 mm (25″) of H2O vacuum being caused by a restriction in the engine air filter assembly.

4Park Brake - illuminates when the park brake handle is pulled upward in the lock position and goes out when the park brake is in the downward (operate) position.

5Safety Belt - illuminates when the ignition switch is turned to the “RUN” position and stays illuminated for five seconds to remind the operator to fasten the safety belt. The light will then go out and will not re-light until the ignition switch is turned off and then turned back to the run position.

6Low Fuel Level - illuminates when the fuel in the tanks is at 1/12 or less capacity (1/12 equals 68.1 L or 18 US gals).

7PTO Switch - illuminates when the PTO switch is placed in the “ON” position and power is supplied to the circuit supplying the PTO solenoid.

8 Alternator Output - illuminates when the alternator has stopped sending a charging output to the electrical system.

9Front Differential Lock - illuminates when the differential lock switch is placed in the “ON” position. The light goes off when the differential lock switch is placed in the “OFF” position or when the brake is depressed.

10Right Turn Signal and Flasher Indication Arrow - illuminates when the multifunction switch is placed in the right turn position (flashes), when the multifunction switch is placed in the left turn position (steady) and when the rotary light switch is in positions two or three (flashes).

11Engine Coolant Level - illuminates when the engine coolant in the radiator has dropped 4.5 L (5.3 US qts.) below the acceptable fill level in the radiator.

12Red Engine Coolant Temperature - illuminates when the engine coolant temperature reaches 109°C (228°F), indicating engine overheating requiring shutdown.

13Not used.

14Engine Oil Pressure - illuminates when the engine oil pressure reaches 100 kPa (15 PSI), indicating the engine oil pressure has reached a point unacceptable for proper engine lubrication.

2-16