Buhler 2375, 2335, 2425, 2290, 2360 manual Check the engine mounts

SECTION 3 - LUBRICATION AND MAINTENANCE

EVERY 1500 HOURS OR YEARLY

OPERATION 56

Check the engine mounts

The engine is mounted in stationary rubber mounts at the two rear corners and the front center of the engine in the front frame of the tractor. The front center mount is a double rubber mount assembly.

On the 2290 and 2335, 2375 (QSM11) engine, check the two rear mounts, 1, for wear or deterioration and torque the mount bolt and nut to 280 N⋅m (205 ft. lbs.). Torque the mounting bracket to engine bolts, 2, to 260 N⋅m (190 ft. lbs.).

Check the 2290, 2335, and 2375 front mounts, 1, for wear or deterioration and torque the mount bolts and nuts to 280 N⋅m (205 ft. lbs.). Torque the mounting bracket to engine bolts, 2, to 45 N⋅m (35 ft. lbs.).

On the 2360 and 2425 (N14) engines, check the two rear mounts, 1, for wear or deterioration and torque the mount bolt and nut to 280 N⋅m (205 ft. lbs.). The mounting bracket to engine bolts are not easily accessible. If a concern of possible loose hardware is suspected, contact your Buhler Versatile dealer.

2

1

Figure 3-93

21

Figure 3-94

1

Figure 3-95

3-59