Toro 2300-D, 2600D Indicator Lights and Circuits, Oil Pressure Light, Glow Light, Battery Light

Indicator Lights and Circuits

Note: Individual light bulbs can be tested by removing them from the lighting cluster and applying 12 VDC to their wiring terminals.

Oil Pressure Light

The oil pressure light should come on when the ignition switch is in the ON position with the engine not running. Also, it should light with the engine running when the oil pressure drops below 4 PSI (0.3 kg/cm2).

1.Disconnect the brown wire from the oil pressure switch.

2.Ground the brown wire to the engine block.

3.Turn the ignition switch to ON; the light should come

on.

4.Turn the ignition switch to OFF and connect the brown wire to the oil pressure switch.

High Temperature (Water) Shutdown Light

The temperature light should come on only if the high temperature shutdown switch and relay have stopped the engine when the coolant temperature is above 206
F (97
C). The ignition switch must be in either the ON or START position for the light to come on.

1.Disconnect the tan wire from the high temperature shutdown switch.

2.Ground the tan wire to the engine block.

3.Turn the ignition switch to ON; the light should come on and the high temperature shutdown relay should click.

4.Turn the ignition switch to OFF and connect the tan wire to the high temperature shutdown switch.

Glow Light

The glow light should come on with the ignition in the GLOW or START position.

1.Turn the ignition switch to GLOW or START; the light should come on.

2.Turn the ignition switch to OFF.

Battery Light

The battery light should come on when the ignition switch is in ON with the engine not running or with an im- properly operating charging circuit while the engine is running.

1.Turn ignition switch to ON; the light should come on.

2.Turn ignition switch to OFF.

OIL	FRONT	WATER
(RED)
		(RED)

BATT	GLOW
(AMBER)	(AMBER)

1 6

2 5

1 2 3 4 5 6

BACK

Figure 9

2 GLOW 3

5BATT

6OIL 4

1WATER

Figure 10

Electrical System Page 5 ± 20 Reelmaster 2300±D/2600±D