Toro 2300-D, 2600D service manual Hydraulic System, Page 4 ±, Reelmaster 2300±D/2600±D

A.If the valve stop (13) and set screw (7) did not separate during disassembly, screw them into the spool (5) and torque valve stop from 85 to 100 in±lb.

B.If the valve stop (13) and set screw (7) separated during disassembly, screw the set screw completely into the spool (5). Then loctite the exposed threads and screw the valve stop onto the set screw and spool. Torque valve stop from 85 to 100 in±lb.

4.Coat spool (5) with clean hydraulic oil and carefully push and twist spool into the valve housing (9). Ensuring not to damage the seals.

5.Install plug (2) and new O±ring (3) into the spool (5). Torque plug from 85 to 100 in±lb.

6.Press valve cap (1) onto valve housing (9). If the valve cap is damaged or will not fit tightly onto the the valve housing, replace the valve cap with a new one.

Hydraulic System Page 4 ± 56 Reelmaster 2300±D/2600±D