Procedure for Reel Drive Pump Efficiency Check:

1.Make sure hydraulic oil is at normal operating tem- perature by operating the machine for approximately 10 minutes.

2.Make sure machine is parked on a level surface with the cutting units lowered. Make sure engine is off and the parking brake is engaged.

3.Make sure the hydraulic tank is full.

CAUTION

Operate all hydraulic controls to relieve system pressure and avoid injury from pressurized hydraulic oil.

4.Clean hose connection and reel drive pump. Dis- connect hose connection on the reel drive pump leading port P1 on the hydraulic manifold.

IMPORTANT: Make sure oil flow indicator arrow on the flow gauge is showing that the oil will flow from the pump through the tester and into the valve block.

5.Install tester in series with reel drive pump and the disconnected hose leading to port P1 of the hydraulic manifold. Make sure the flow control valve is fully open.

6.Make sure backlap knob on the valve block is in the mow position.

7.Make sure tester load valve is fully before starting the engine.

8.Start engine and move throttle to full speed (3200 

100RPM). Do not engage the cutting units.

9.Watch pressure gauge carefully while slowly clos- ing the flow control valve until 1500 PSI is obtained. Verify with a phototac that the pump speed is 2900 RPM.

10.Flow indication should be 5.4 GPM minimum.

11.Shut off engine.

12.Disconnect tester from manifold and hose. Recon- nect hose to the pump.

13.If flow was less than 5.4 GPM or a pressure of 1500 PSI cannot be obtained, check for restriction in the pump intake line. If line is not restricted, remove pump and re- pair or replace as necessary.

System

Hydraulic

Reelmaster 2300±D/2600±D

Page 4 ± 27

Hydraulic System

Page 65
Image 65
Toro 2600D, 2300-D service manual Procedure for Reel Drive Pump Efficiency Check, 100 RPM. Do not engage the cutting units

2600D, 2300-D specifications

The Toro 2300-D and 2600-D are industry-leading reel mowers specifically designed for the professional turf care market. Known for their durability, efficiency, and advanced technology, these models provide exceptional cutting performance for golf courses, sports fields, and other high-quality turf applications.

One of the standout features of the Toro 2300-D and 2600-D is their powerful engines. Powered by efficient diesel engines, these mowers deliver robust performance while being fuel-efficient. This capability ensures extended operation periods, allowing grounds crews to maintain pristine conditions across large areas without frequent refuelling stops.

Both models are equipped with Toro’s exclusive DPA (Dual Precision Adjust) cutting system, providing precise cutting heights for optimal turf health. This system allows for adjustments from 1/8 inch to 1 inch, enabling operators to achieve the correct level for various grass types and turf conditions. This level of precision ensures a clean cut and promotes the overall health of the grass.

Another notable characteristic is the ergonomic design, which includes a comfortable operator station to reduce fatigue during extended use. The controls are intuitively located, enabling easy access and operation, and the mower's compact design allows for nimble maneuverability around obstacles, ensuring that every inch of turf can be accurately maintained.

In terms of technology, the Toro 2300-D and 2600-D feature advanced traction control systems that provide excellent grip and stability on slopes and uneven terrain. The lightweight alloy construction of the frame contributes to this stability, giving operators confidence whether they are working on flat surfaces or more challenging landscapes.

Furthermore, these mowers are designed with sustainability in mind. The diesel engines not only offer efficiency but also are compliant with strict emissions standards, making them an environmentally responsible choice for turf maintenance.

The Toro 2300-D and 2600-D also feature a robust maintenance management system that alerts operators of necessary maintenance tasks, promoting longer lifespans for components and enhancing overall performance.

In summary, the Toro 2300-D and 2600-D deliver cutting-edge technologies and features, including powerful engines, versatile cutting systems, ergonomic design, advanced traction control, and sustainability focus. These models represent the pinnacle of reel mower engineering, making them ideal choices for professionals dedicated to maintaining the finest playing surfaces.