Skid Kit Installation
1.Remove front roller from the cutting unit (see Roller Removal and Installation).
2.Align skid slots with the angle bracket holes on the cutting unit.
3.Secure skid to the cutting unit with both flange head screws, flat washers, and lock nuts.
4.Adjust skid height as necessary by loosening lock nuts and flange head screws, then retighten fasteners.
4 | 5 |
| |
2 |
|
3 |
|
1 |
|
Figure 30
1. | Skid | 4. | Flat washer |
2. | Angle bracket holes | 5. | Lock nut |
3. | Flange head screw |
|
|
Cutting Units | Page 7 ± 26 | Reelmaster 2300±D/2600±D |