-2-
INTRODUCTIONINSTALLATIONCAUTIONThank you very much for your purchase of this product-the most natural Colour Television Receiver.
To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready
reference.
Locate the receiver in the room where direct light does not strike the screen.
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
Allow enough space between the receiver and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature component
failure.
This TV receiver can be connected to AC 220 Volts,50/60 Hz .Never connect to DC supply or any other
power supply.
Do not install the receiver in a location near heat sources such as radiator, air ducts, direct sunlight, or in
a place somewhere like close compartment and close area.
Do not cover the ventilation openings when using the set.
Never tamper with any components inside your set, or any other adjustment controls not mentioned in
this manual. All television receivers are high voltage instruments. The PICTURE TUBE of the TV set is in a
almost vacuum condition. If broken, glass fragments will be violently expelled. Scratching, chipping or
undue pressure is dangerous and should be avoided. When you clean up dust or stick of a water drop on
the PICTURE TUBE FACE or CABINET, the power cord should be pulled out from the plug receptacle, then
wipe the receiver with dried soft cloth. During thunder and lighting, unplug the power cord and antenna
cord to prevent your TV set from damage. All "inside work" on your receiver should be performed only by
the TV service personnel.