ReproB duction, Installing the Grass Bag, Adapter

							Operation
Installing the Grass Bag						Installing the Mulching Plug
Adapter						(Optional Accessory on Some Models)
(Optional Accessory on Some Models)				!		!	WARNING	!
	!	WARNING		!		service with engine and blade running. STOP engine
						DO NOT attempt any maintenance, adjustments or
DO NOT attempt any maintenance, adjustments or						and blade. Disconnect spark plug wire and secure
service with engine and blade running. STOP engine						and blade. Disconnect spark plug wire and secure
service with engine and blade running. STOP engine						away from spark plug. Engine and components are
and blade. Disconnect spark plug wire and secure						away from spark plug. Engine and components are
and blade. Disconnect spark plug wire and secure						HOT. Avoid serious burns, allow sufficient time for all
away from spark plug. Engine and components are						HOT. Avoid serious burns, allow sufficient time for all
away from spark plug. Engine and components are						components to cool.
HOT. Avoid serious burns, allow sufficient time for all						components to cool.
components to cool.						1. Install the mulching plug (A, Figure 11) if mulching
1.	Remove the mulching cover. Refer to the Section					is desired after the bag adapter is installed. Install
1.	Remove the mulching cover. Refer to the Section					the mulching plug completely and securely into the
	entitled “Removing the Mulching Cover”.					the mulching plug completely and securely into the
	entitled “Removing the Mulching Cover”.					bag adapter (B).
2.	Install the adapter (A, Figure 10) to the deck in					bag adapter (B).
2.	Install the adapter (A, Figure 10) to the deck in					2. Install the grass bag as a safeguard.
	place of the mulching cover, making sure that:					2. Install the grass bag as a safeguard.
•	place of the mulching cover, making sure that:					3. Refer to the Section entitled “Mulching Operation”.
•	The front hole (B) on the outside front of the adapt-					3. Refer to the Section entitled “Mulching Operation”.
	er fits over the stud where the front of the mulching
	cover was originally secured;		ReproB duction
			ReproB duction
•	The slot (C) on top of the adapter slips under the				for
	restraining nut on top of the deck (under the right
•	front corner of the engine);						A
•	The slot (D) on the rear of the adapter slips onto						A
	the stud behind the rear of the discharge opening,
	where the rear of the mulching cover was originally
3.	secured.
3.	Install the nuts onto the studs and tighten securely.
4.	Route the recoil rope around the outside of the						B
	rope guide pulley (E).						B
NOTE: The recoil rope may need to beNotslackened.
Refer to the section entitled “Starting the Mower”.
		E				Figure 11: Installing the mulching plug
		E
			C

Snapper 7800849 ReproB duction, Installing the Grass Bag, Installing the Mulching Plug, Adapter

Models: 7800849

Installing the Grass Bag

Installing the Mulching Plug

Adapter

ReproB duction

Figure 11: Installing the mulching plug

Figure 10: Installing the grass bag adapter