Snapper 7800849 manual Maintenance Chart, Emissions Control, Mower, Engine

				Maintenance
Maintenance Chart			Emissions Control
!	WARNING	!
			Maintenance, replacement, or repair of the emissions
DO NOT attempt any maintenance, adjustments or			control devices and systems may be performed by any
service with engine and blade running. STOP engine			non-road engine repair establishment or individual.
and blade. Disconnect spark plug wire and secure			However, to obtain “no charge” emissions control ser-
away from spark plug. Engine and components are			vice, the work must be performed by a factory autho-
HOT. Avoid serious burns, allow sufficient time for all			rized dealer.
components to cool. Wear heavy leather gloves when
handling or working around cutting blades. Blades are
extremely sharp and can cause severe injury.
MOWER				ENGINE
Every 8 Hours or Daily				First 5 Hours
Check safety interlock system				Change engine oil
Clean debris off mower				Every 8 Hours or Daily
Every 25 Hours or Annually *				Check engine oil level
Check mower for loose hardware				Eve y 25 Hours A ually *
See Dealer Annually to				Clean eng ne a r f lter and pre-cleaner (if equipped)
				**
Lubricate mower
				Every 50 Hours or Annually *
Check mower blade **
				Change engine oil
Check mower blade stopping time
				Replace oil filter (if equipped)
Check drive belt
				Annually
Clean battery and cables
				Replace air filter
* Whichever comes first
				Replace pre-cleaner (if equipped)
**Check blade more often in regions with sandy soils
				See Dealer Annually to
or high dust conditions.
				Inspect muffler and spark arrester (if equipped)
				Replace spark plug
				Replace fuel filter (if equipped)
				Clean engine air cooling system
		Reproduction
				* Whichever comes first
				**Clean more often in dusty conditions or when
				airborne debris is present.

en

17