Cleaning the Radiator and Screen
To prevent the engine from overheating, the radiator screen, radiator, and oil cooler must be kept clean. Check these components daily. If necessary, clean any debris off these parts. Clean these components more frequently in dusty dirty conditions.
1.Remove radiator screen (1).
2.Remove four cap screws and nuts that hold the plastic cover to the radiator assembly. Remove plastic cover from the radiator assembly.
3.Loosen both quick release knobs on the front end of the radiator assembly. Now the oil cooler (3) can be removed from the radiator for cleaning.
CAUTION
Use eye protection such as goggles when using compressed air.
4.Working from fan side of radiator (2), either spray the radiator with a hose or blow with compressed air.
5.Thoroughly clean oil cooler (3). Clean off any other debris that may have collected around components.
6.Reinstall the oil cooler (3). Tighten both quick re- lease knobs on the front end of the radiator assembly.
7.Reinstall plastic cover onto the radiator assembly. Reinstall four cap screws and nuts that hold the plastic cover to the radiator assembly. Tighten fasteners
8.Clean radiator screen (1) and reinstall.
1
3
2
|
| Figure 13 |
1. | Radiator screen | 3. Oil cooler |
2. | Radiator |
|
Engine
Reelmaster 2300±D/2600±D | Page 3 ± 11 | Engine |
