Hydraulic Motor Removal and Installation

Removal

1.Remove two capscrews holding the hydraulic motor to the bearing housing.

2.Remove hydraulic motor and spider coupling from the bearing housing.

3.Position the hydraulic motor away from the cutting unit prior to removing or working on the cutting unit.

Inspection

1.Inspect spider coupling for wear. Replace worn cou- pling with new one.

2.Check coupling inside bearing housing. If coupling is loose remove and check for worn threads. Replace coupling if threads are worn. Reinstall coupling (see Reel Removal and Bearing Replacement, Install Reel).

Installation

Note: The cutting unit can be installed with the hy- draulic motor driving the unit from the other side. If so, remove the bearing housing cap screws, cover, and cover gasket; reinstall them on the opposite bearing housing from the motor.

1.Dip spider coupling in No. 2 General Purpose Lithi- um Base Grease. Reinstall spider coupling into the bearing housing.

2.Reinstall hydraulic motor.

A.On models without the O±ring, clean bearing housing face and place a bead of RTV around the face of the housing to form a seal. Mount hydraulic motor to the bearing housing. Secure motor with the two capscrews.

B.On models with O±rings, replace if necessary. Make sure O±ring is on the front plate of the motor. Mount hydraulic motor to the bearing housing. Se- cure motor with the two capscrews.

3.Grease bearing housing sufficiently to fill housing with grease (see Greasing Bearings, Bushings, and Piv- ot Points).

 

HOUSING

 

FACE

 

2

3

 

4

 

5

1

 

Figure 14

1.

Capscrew

4.

Spider couping

2.

Hydraulic motor

5.

O±ring

3.

Bearing housing

 

 

Cutting Units

Reelmaster 2300±D/2600±D

Page 7 ± 13

Cutting Units

Page 171
Image 171
Toro 2600D, 2300-D service manual Hydraulic Motor Removal and Installation, Inspection

2600D, 2300-D specifications

The Toro 2300-D and 2600-D are industry-leading reel mowers specifically designed for the professional turf care market. Known for their durability, efficiency, and advanced technology, these models provide exceptional cutting performance for golf courses, sports fields, and other high-quality turf applications.

One of the standout features of the Toro 2300-D and 2600-D is their powerful engines. Powered by efficient diesel engines, these mowers deliver robust performance while being fuel-efficient. This capability ensures extended operation periods, allowing grounds crews to maintain pristine conditions across large areas without frequent refuelling stops.

Both models are equipped with Toro’s exclusive DPA (Dual Precision Adjust) cutting system, providing precise cutting heights for optimal turf health. This system allows for adjustments from 1/8 inch to 1 inch, enabling operators to achieve the correct level for various grass types and turf conditions. This level of precision ensures a clean cut and promotes the overall health of the grass.

Another notable characteristic is the ergonomic design, which includes a comfortable operator station to reduce fatigue during extended use. The controls are intuitively located, enabling easy access and operation, and the mower's compact design allows for nimble maneuverability around obstacles, ensuring that every inch of turf can be accurately maintained.

In terms of technology, the Toro 2300-D and 2600-D feature advanced traction control systems that provide excellent grip and stability on slopes and uneven terrain. The lightweight alloy construction of the frame contributes to this stability, giving operators confidence whether they are working on flat surfaces or more challenging landscapes.

Furthermore, these mowers are designed with sustainability in mind. The diesel engines not only offer efficiency but also are compliant with strict emissions standards, making them an environmentally responsible choice for turf maintenance.

The Toro 2300-D and 2600-D also feature a robust maintenance management system that alerts operators of necessary maintenance tasks, promoting longer lifespans for components and enhancing overall performance.

In summary, the Toro 2300-D and 2600-D deliver cutting-edge technologies and features, including powerful engines, versatile cutting systems, ergonomic design, advanced traction control, and sustainability focus. These models represent the pinnacle of reel mower engineering, making them ideal choices for professionals dedicated to maintaining the finest playing surfaces.