Fixed Side Plate Installation (Fig. 28 and Fig. 29)
1.Remove pop rivets and rear height±of±cut plates from both sides of the cutting unit (Fig. 28).
2.Remove lock nuts, capscrews, washers, and both links from the cutting unit (Fig. 28).
3.Align fixed side plate with holes on the cutting unit (Fig. 29).
4.Attach new capscrews, washers, and flanged lock nuts to the fixed side plate and the cutting unit (Fig. 29).
5.Tighten lock nuts and capscrews
6.Fasten new height±of±cut plate to the cutting unit with new pop rivets (Fig. 29).
7.Repeat steps 1. through 6. for the other side of the cutting unit.
2 | 6 | 4 |
| ||
|
| |
| 1 |
|
3 |
|
|
5 |
|
|
|
| Figure 28 |
|
1. | Pop rivet | 4. | Capscrew |
2. | Height±of±cut plate | 5. | Washer |
3. | Lock nut | 6. | Link |
5 |
1 |
6 |
3 |
4 |
2 |
Figure 29
1. | Fixed side plate | 4. | Flanged lock nut |
2. | Capscrews | 5. | Height±of±cut plate |
3. | Washers | 6. | Pop rivet |
Cutting Units
Reelmaster 2300±D/2600±D | Page 7 ± 25 | Cutting Units |
