Specifications |
Figure 1
MOUNTING: All cutting units are supported by equal length independent lift arms and are interchangeable to all three cutting unit positions.
REEL CONSTRUCTION: 5 or 8 blades of 7º (18 cm) di- ameter welded to 5 stamped steel spiders. Reels are mounted on greaseable self±aligning ball bearings. The RM2300±D reel is 27 inches long and the RM2600±D reel is 32 inches long.
HEIGHT OF CUT RANGE:
Floating Cutting Unit ± 1/4º to 1±3/4º (6.4mm to 44.4mm)
Fixed Cutting Unit ± 1/2º to 2±5/8º (12.7 mm to 65.6 mm)
POWER: Reel motors allow easy removal from or instal- lation onto the cutting unit. Cutting units can be driven from either end.
HEIGHT±OF±CUT & ROLLER ADJUSTMENT: Height±of±cut adjustment is made with the rear roller by a quick locating pin and/or threaded micro±adjustment. Front roller position is adjustable to 3 locations to set cut- ting unit attitude.
BEDKNIFE AND BEDBAR ADJUSTMENT: A single knob screw adjustment for bedknife to reel is located at the center of the bedbar. The adjustment knob detent al- lows 0.001 inch bedknife movement for each indexed position.
CLIP FREQUENCY: With variable speed set to maxi- mum rpm:
5 blade at 880 reel rpm moving 4 mph (6.4 km/h)
.96º (24.4 mm) clip.
5 blade at 880 reel rpm moving 5 mph (8 km/h) 1.19º (30.3 mm) clip.
8 blade at 880 reel rpm moving 4 mph (6.4 km/h)
.60º (15.2 mm) clip.
8 blade at 880 reel rpm moving 5 mph (8 km/h)
.75º (19.1 mm) clip.
RM2300±D OPTIONAL EQUIPMENT:
Full Roller Kit | Model No. 03440 |
Sectional Roller Kit | Model No. 03445 |
Wiehle Roller Kit | Model No. 03450 |
Anti±Scalp Roller Kit | Model No. 03447 |
Grass Basket Kit | Model No. 03443 |
Roller Scraper Kit | Part No. 60±9560 |
Comb Kit | Part No. 67±9400 |
Fixed Kit | Part No. 93±6915 |
Skid Kit | Part No. 94±3664 |
RM2600±D OPTIONAL EQUIPMENT: | |
Sectional Roller Kit | Model No. 03476 |
Wiehle Roller Kit | Model No. 03475 |
Anti±Scalp Roller Kit | Model No. 03477 |
Roller Scraper Kit | Model No. 03478 |
Fixed Kit | Part No. 93±6915 |
Skid Kit | Part No. 94±3664 |
CUTTING UNIT LIFT: Hydraulic lift has an automatic reel shut off. All units are controlled from one lever.
SUSPENSION SYSTEM: Adjustable counterbalance spring provide for a fully floating suspension. L±I±N± K±S cutting unit suspension system provides fore and aft oscillation. Main center pivot allows side±to±side os- cillation. With optional Fixed Kit (Part No. 93±6915), cut- ting units can be locked into fixed (fore/aft) position for use with skids or anti±scalp rollers.
Cutting Units | Page 7 ± 2 | Reelmaster 2300±D/2600±D |