Starting Problems (continued)
Problem | Possible Causes |
|
|
Engine cranks, but does not start. | Wiring to start circuits (see Wiring Schematics) is |
| loose, corroded, or damaged. |
| Diode (D1) circuit board/connector housing is open if |
| engine starts with operator in the seat. |
| Fuel valve solenoid is faulty. |
| Glow plugs are faulty. |
| Engine or fuel system is malfunctioning (see Chapter |
| 6 ± Engine). |
| Engine and fuel may be to cold. |
|
|
Engine cranks (but should not) with the traction pedal | Traction (neutral) interlock switch is out of adjustment, |
out of the neutral position. | faulty, or short circuited. |
| Diode (D1) circuit board/connector housing is short |
| circuited. |
|
|
Engine cranks (but should not) with the cutting unit | Backlap/mow switch is in the backlap position. |
switch ON (pulled out). | Cutting unit switch is faulty or short circuited. |
| |
|
|
System
Electrical
Reelmaster 2300±D/2600±D | Page 5 ± 11 | Electrical System |