Buhler 2290, 2335, 2425, 2375, 2360 manual Electrical System

SECTION 4 - TROUBLESHOOTING

ELECTRICAL SYSTEM

PROBLEM	POSSIBLE CAUSE	CORRECTION
Electrical system is	Loose or corroded battery	Clean and tighten connections.
inoperative	connections.
	Sulfated batteries.	Check each battery open circuit
		voltage for 12.6 volts minimum.
		Check electrolyte level and
		specific gravity.
	Fuse or relay failure.	Check fuse panel.
	Ignition switch failure.	Contact Buhler Versatile dealer.
Starter speed low and	Loose or corroded connections.	Clean and tighten connections.
engine cranks slowly	Low battery output.	Check each battery open circuit
		voltage for 12.6 volts minimum.
		Check electrolyte level and
		specific gravity of each battery.
	Incorrect viscosity engine oil.	Use correct viscosity oil for
		temperature conditions.
	Defective starter.	Contact Buhler Versatile dealer.
Starter inoperative	Transmission speed lever in gear.	Place shift lever in neutral.
	Park brake not engaged.	Engage park brake.
	Loose or corroded connections.	Clean and tighten loose
		connections.
	Dead batteries.	Charge or replace batteries.
	PTO (option) switch on.	Turn switch off.
	Incorrect ignition operation.	Turn ignition to “OFF,” then to
		“START” position.
	Neutral start switch or PTO switch	Contact Buhler Versatile dealer.
	malfunction.
Charge indicator lamp stays	Low engine idle speed.	Increase idle speed.
on with engine running	Loose belt.	Check automatic belt tensioner.
	Malfunctioning battery(ies).	Check each battery open circuit
		voltage for 12.6 volts minimum.
		Check electrolyte level and
		specific gravity.
	Malfunctioning alternator.	Contact Buhler Versatile dealer.

4-8