SECTION 3 - LUBRICATION AND MAINTENANCE
AS REQUIRED
OPERATION 75
WHEEL INSTALLATION
Articulation Blocks
IMPORTANT: Install the proper articulation blocks on the tractor before the single, dual, or triple wheels are installed on the unit to prevent any accidental damage from occurring.
Articulation blocks are required for many tire sizes and configurations. Determine the articulation blocks to be used for your tractor and tires from the tire configuration charts in Section 1.
Use the following procedures to obtain the desired setting.
WARNING: IMPROPER ASSEMBLY OF THE
ARTICULATION BLOCKS CAN CAUSE THE
TRACTOR WHEELS TO CONTACT THE FUEL
TANK WHEN TURNING, LIMITING TURNING
ABILITY AND CONTROL OF THE TRACTOR.
42° - The maximum turning angle allowed by the steering cylinders is 42°. If your tire size allows an angle of 42°, no articulation blocks are required.
Figure
