SECTION 2 - OPERATION
ARTICULATION LOCK
The articulation lock pin prevents the tractor frames from articulating when placed in the lock position. The pin has two positions in the frame:
When the pin is in the right side of the frame, 1, it is in the operate position.
When the pin is in the left side of the frame, 2, it is in the lock position.
Use the articulation lock during stationary applications, servicing, jacking or overhaul operations. Do not use when the tractor is operating. To install the articulation lock, use the following procedure:
1.Before engaging the lock, drive the tractor to a level surface, put the steering straight, engage the park brake, put the gearshift in neutral, and stop the engine.
2.Remove the pin from the operate position on the right side of the frame and put the pin through the hole on the left side of the frame.
NOTE: It may be necessary to start the engine and articulate the frame slightly to be sure the articulation pin is positioned properly and completely seated through the frame pieces.
1
Figure
2
Figure