Buhler 2425, 2335 Lubricate the Rear Steering Cylinder Pins, Lubricate the Upper Articulation Pin

SECTION 3 - LUBRICATION AND MAINTENANCE

EVERY 10 HOURS OR DAILY

OPERATION 16

Lubricate the Rear Steering Cylinder Pins

Lubricate the bottom two grease fittings, 1, remotely mounted on the left rear frame, until grease flows from around the pin seals. This will purge any dirt accumulated in the pivot pin area.

Use Moly based EP high temperature grease available from your Buhler Versatile dealer.

1

Figure 3-31

OPERATION 17

Lubricate the Upper Articulation Pin

Lubricate the grease fitting, 1, until grease flows from between the frame pieces. This will purge any dirt accumulated in the pivot pin area.

Start the unit and articulate from side to side to work the grease into the joint.

Use Moly based EP high temperature grease available from your Buhler Versatile dealer.

OPERATION 18

Lubricate the Front Drag Link Pins

Lubricate the grease fittings (one on each side), 1, until grease flows from around the pin seals. This will purge any dirt accumulated in the pivot pin area.

Use Moly based EP high temperature grease available from your Buhler Versatile dealer.

1

Figure 3-32

1

Figure 3-33

3-26