Buhler 2375, 2335, 2425, 2290, 2360 manual Operation

SECTION 2 - OPERATION

3.Locate the small pin connector, 1, for the shutdown circuit. The pin connector is between the 3-amp turn signal fuse and the 10-amp tail lamp fuse. Remove the 3-amp fuse and 10-amp fuse from their locations to give better access to the small pin connector.

4.Using a small pair of needle-nose pliers, pull straight upward on the small pin connector, 1, and reinstall it so the front two pins are connected together. The rear pin will now be bare. Reinstall the 3-amp and 10-amp fuses.

5.Locate the shutdown relay position, 1, ( the fourth relay from the right), and install a relay (part #9706720 purchased from your Buhler Versatile dealership). Press the relay firmly into the electrical control panel.

6.Reinstall the cover onto the electrical control panel.

7.Reconnect the battery cables.

To disable the shutdown feature, follow this procedure in reverse order.

1

Figure 2-126

1

Figure 2-127

1

Figure 2-128

2-95