SECTION 2 - OPERATION
2-146
IMPLEMENT CONNECTION
With the levers, 1, horizontal and the safety pins,
2, in the storage position, back the tractor up to
the implement. Using the manual raise/lower
switch, couple the quick hitch to the implement.
Figure 2-209
2
1
When the lower links are seated properly, insert
the safety pins, 1, to lock the spring-loaded
latches in place.
WARNING: WHENEVER AN IMPLEMENT IS
ATTACHEDTO THE QUICK HITCH, USE THE
SAFETY PINS. IF THE SAFETY PINS ARE
NOT IN PLACE, THE POSSIBILITY OF
INADVERTENT DETACHMENT EXISTS,
PARTICULARLYDURING TRANSPORT.
Figure 2-210
1
IMPLEMENT DISCONNECT
Lower the implement to the ground where you
want to disconnect. Be sure the implement is
sitting in a secure position and will not shift or tip
when disconnected from the quick hitch.
Removethe safety pins, 1, and move the lever, 2.
to a vertical position. The implement is now
attached only by the top link. Using the manual
raise/lower switch, lower the 3-point hitch to
clear the top link pin.
Figure 2-211
2
1