SECTION 2 - OPERATION

Wide Transport Marker Lights

Wide transport marker lights are standard with all tire options.

The flashing wide transport marker lights function in unison with the front and rear roof-mounted warning lights. The lights will flash in the hazard lights, roadway use, and turn signal position of the rotary light switch and multifunction switch.

The wide transport marker lights have an adjustable width with three settings depending on the size of tires used. It is recommended that the tube be adjusted so the outside edge does not extend passed the tire edge. To change the width of the tube, remove the bolt, 1, from the tube and reposition it to the desired width. Reinstall the bolt and tighten.

When not in use, the wide transport marker lights can be swung up toward the tractor frame at approximately either 70° or 90° angle and held in this position using the existing hardware.

See Section 3 for information on how to adjust the light to the storage position.

Figure 2-65

1

Figure 2-66

Figure 2-67

2-46

Page 104
Image 104
Buhler 2360, 2335, 2425, 2290, 2375 manual Wide Transport Marker Lights