Panasonic DMC-FZ2A operating instructions Turning Power on/off, Power indicator Lighting, Blinking

Preparation

Turning Power on/off

1 Set the power switch to [ON].

• The power indicator 1 lights.

2 Set the power switch to [OFF].

1,2

OFF≥ ≥ON

OFF≥ ≥ON

ªPower indicator Lighting:

•When turning the power switch to [ON]

Blinking:

•When the Memory Card/battery door is opened

•When the card is not inserted

•When no space is left in the card

•When the card is protected during recording

•When setting the mode dial from the playback mode to recording mode with the lens cap attached

•When the remaining battery power is low (blink slowly)

•When the power switch is turned on, do not hold the lens cover. If the lens cover does not open, [SYSTEM ERROR] is displayed. Turn the power switch off and on.

•When turning on the power in the recording mode, do not put any obstacle in front of the lens.

•Please be sure to remove the lens cap before you switch on the camera in

recording mode. If not, the message “REMOVE LENS CAP AND PRESS

BUTTON” appears on the LCD monitor/Viewfinder. Please remove the lens cap and press 4/[REVIEW/SET] button 2.

•Do not make a pressure on the lens when the lens barrel comes out. Confirm that the lens is put in when you wipe the lens.

17