Panasonic DMC-FZ2A Inserting the Card, Removing the card, Open the Memory Card/battery door

Preparation

Inserting the Card

3

OPEN

[Preparation]

•Check that the power switch is set to [OFF] and the lens is stored.

•Close the flash. (P37)

1Slide the lever to the direction of the arrow to open the Memory Card/ battery door.

2Insert the card with the label facing the front of the camera.

	• Insert the card, pressing gently until it
2	locks in place. If the card will not insert
	freely, it may be reversed. Do not force

the card.

• Do not touch the connection terminals on the back side of the card.

3 Close the Memory Card/battery door.

[Removing the card]

1Open the Memory Card/battery door.

4	2	Press the card to release.
	3	Pull the card out.

4Close the Memory Card/battery door.

OPEN

2

•If the Memory Card door cannot completely close, take the card out and insert it again.

•If the card cannot be fully inserted, verify whether the direction of the card is correct.

•We recommend that you use a Panasonic branded SD Memory Card. (Use only the genuine card)

•If the card is not fully inserted, the card may be damaged.

15