Panasonic DMC-FZ2A operating instructions Setting up the Power Save Mode, Press the Menu button

Technical use

Setting up the Power Save Mode

1,5

2,3,4

3,4

	REC	SETUP 1/2
MONITOR
AUTO REVIEW		OFF
BEEP

POWER SAVE

2MIN. 5MIN. 10MIN. OFF

SELECT SET EXIT MENU

In this mode, if the camera is not operated for a certain amount of time, it is automatically turned off.

1Press the [MENU] button.

2Press 1 to open the setup menu.

3Press 3/4 to select [POWER SAVE].

4Press 2/1 to choose the setting time.

•[2MIN.]

•[5MIN.]

•[10MIN.]

•[OFF]: the power is not turned off automatically.

5Press the [MENU] button.

•The menu will disappear.

•If you want to cancel the power save mode, turn the power switch to [ON] again after turning it to [OFF], or press the shutter button.

•When using the AC adaptor/connecting to a PC/recording the motion image/ playing back the motion image/during Slide Show, the power save mode is not available.

•In simple mode [ ], the power save is fixed to [2MIN.].

84