Preparation
22
Attaching the Lens Cap
When you turn the camera [OFF] or draw
back the lens, attach the supplied lens cap to
protect the surface of the lens.
1Let the top of the string pass through
the lens cap.
2Let the opposite side of the string
pass through the circular part of the
string.
3Pull to the direction of the arrow.
4Let the top of the lens cap string pass
through the strap eyelet as shown in
the picture.
5Attach the lens cap.
• Remove the lens cap before turning on the
camera in the recording mode.
• Even when the lens hood is attached, you
can attach the lens cap without the string.
1
2
3
4
5
FZ2-A.book 22 ページ ２００３年８月６日　水曜日　午前１０時０分