Canon IR3300 Copier Default Chart and Paper Size Override Settings

Default Paper	Plain Paper, Transparency, Heavy Paper, Recycled, Color,
Type	Letterhead, Tracing Paper, Labels, Bond Paper, Envelope
	This parameter sets the default paper type to be used for print job. This
	printer has internally defined optimal print modes for each specified paper
	type.
	IMPORTANT
	• If you are printing from an OS that does not have a printer
	driver for the machine (MS-DOS, UNIX, etc.) make sure
	that the paper loaded in the paper drawer matches the
	paper type specified in this setting. If the paper type
	specified in this setting is not available, an error message
	will be displayed when the machine tries to print the job
	and the machine will stop. In addition, if a paper source
	has not been selected through the application, the
	machine will automatically select default print settings for
	the paper type and size. See “Setting a Paper Drawer for
	Auto Paper Selection/Auto Drawer Switching,” in the
	Reference Guide.

NOTE

•Use the following figures as a guideline to decide whether paper should be specified as Plain Paper or Heavy Paper.

-	Plain Paper:	64 gsm - 90 gsm (64 g/m2 - 90 g/m2)
-	Heavy Paper:	Paper heavier than Plain Paper -
		128 gsm (128 g/m2)

•Canon transparency film is recommended for printing on transparencies.

•Canon label paper is recommended for printing on labels.

•Transparency, Tracing Paper, and Labels cannot be printed using two-sided printing.

Paper Size	On, Off
Override
	When paper of the size that is set in the printer driver has not been loaded
	in the paper drawer, the paper that is printed will be changed to the
	following sizes.
	Printer driver setting		Paper that will be printed on
	A4	→	Letter
	Letter	→	A4
	A3	→	11x17
	11x17	→	A3

If [On] is selected, the paper size will be changed.

If [Off] is selected, the paper supply message will be displayed and the paper size will not be changed.

3

Printer Settings Menu Functions and Operation

Settings Menu 3-5