Transparency Inter- leaving
None, Blank, Printed
When printing on transparencies you can use this setting to output a sheet of paper after each transparency. The paper can be blank, or it can be a paper copy of the transparency.
If [None] is selected, no sheets are interleaved with the transparencies. If [Blank] is selected, a blank sheet of paper is inserted between each transparency.
If [Printed] is selected, a printed paper from the print job is inserted between each transparency.
IMPORTANT
•The transparencies should be fed from the Stack Bypass tray. The paper will be fed from a paper drawer.
NOTE
•If [Printed] is selected, the paper printouts are included in the [Copies] count.
3
Operation
Personality | Auto, PS, PCL |
|
|
This selection enables the machine to process data received from the host computer in the specified data format. Setting the Personality to Auto causes the machine to determine the type of data received from the host on a
NOTE
•If you find that the printer does not correctly switch to the appropriate personality when Personality is set to Auto, change the setting manually to match the data you are sending from the host computer.
Initialize
The menu settings can be reset to the factory defaults by initializing the printer settings.
When you select [Initialize], the confirmation message “Is it OK to initialize the settings?” is displayed. If you select [Yes], the settings are initialized. If you select [No], the settings are not initialized.
IMPORTANT
•Do not turn off the printer while the settings are being initialized, as this may damage the machine’s memory.
Printer Settings Menu Functions and
Settings Menu |
