Buhler 2375, 2335, 2425, 2290, 2360 manual Cab Dome Light, Trouble Light

SECTION 2 - OPERATION

Cab Dome Light

The cab dome light, 1, mounted on the upper left side of the cab, has a three-position control switch, 2. The light switch functions as follows:

Center - Light is off.

Bottom - Light is on constantly.

Top - Light is on only when the cab door is open. Light will turn off when door is closed.

1

2

Trouble Light

A trouble light, 1, is located in the left, rear corner of the cab, under the rear shelf. The light has an

5.5m (18′) cord attached to it that can be reeled in and out using the crank handle, 2. To remove the light, flip the lever, 3, downward and pull the light from the receptacle.

The light switch, 4, is a two-position switch. With the switch lever in the off position (horizontal), the light is off. With the switch lever in the on position (vertical), the light is on as long as the cab door is open. When the cab door closes, the light goes out.

The trouble light is used in conjunction with the cab dome light to illuminate the cab interior when the cab door is open.

To put the trouble light in the storage position, reel the cable all the way in with the crank handle, 2, insert the light into its socket, and flip the lever, 3, upward to catch the small knob on the side of the light.

Figure 2-63

4

2

1

3

Figure 2-64

2-45