SECTION 1 - GENERAL INFORMATION

HAULING THE TRACTOR ON A TRANSPORTER

1.Haul the tractor with all four wheels on a flatbed trailer or truck.

2.Remove the outer duals or triples during hauling unless special permits allow for over-width hauling. Consult local authorities for information on over-width hauling.

3.Make an accurate measurement of the highest point on the tractor when it is on the flatbed of the truck. Consult local authorities regarding over height hauling based on the measurement taken.

4.Tie-down brackets are located on either side of the drawbar cage, 1, to allow a chain of adequate size to be routed through the brackets and hold down the rear end of the tractor.

1

Figure 1-52

5.There are cutout slots, 1, on either side of the front frame of the tractor to allow a chain hook to fasten the front end of the tractor down.

6.Always install the articulation lock pin and set the park brake while transporting the vehicle.

1

Figure 1-53

1-36

Page 56
Image 56
Buhler 2425, 2335, 2290, 2375, 2360 manual Hauling the Tractor on a Transporter