Buhler 2290, 2335, 2425, 2375, 2360 manual Additional Features Electronic Instrument Control System

SECTION 2 - OPERATION

ADDITIONAL FEATURES OF THE

ELECTRONIC INSTRUMENT CONTROL

SYSTEM

Automatic Shutdown Conversion - Each tractor is manufactured so that the operator can convert the Electronic Instrument Control System to shut the tractor engine off. Tractors are assembled with the engine shutdown feature disabled. The operator has the option of enabling the feature at any time.

If the operator desires to enable the automatic shutdown feature, proceed as follows:

1.Unhook the battery cables from the batteries. This will prevent any possibility of an accidental short while making the conversion. See Section 3 for information on how to disconnect the cables.

NOTE: Disconnecting the batteries will not remove any calibration numbers from the memory of the Electronic Instrument Control System. If the tractor is equipped with an optional Tractor Performance Monitor (TPM), the TPM may have to be reset.

2.Remove the cover, 1, from the electrical control panel located directly behind the operator’s seat.

1

Figure 2-125

2-94