Buhler 2375, 2335, 2425, 2290, 2360 manual Shims, 140

SECTION 2 - OPERATION

Place the upper link in the appropriate hitching point on the upper link bracket. The top hole, 1, is for Category III or IV implements. The bottom hole, 2, is for Category III implements only.

To store the upper link, remove the two small hairpin clips, 1, that attach the storage bracket, 2, to the upper link bracket, and pull the bracket away from the tractor. Swing the upper link upward and reinstall the bracket and clips.

Shims

Shims, 1, prevent the lower links from contacting the tires when the lower links are not connected to an implement and are free to move side to side. Use shims so that the lower links do not contact the tires when in their maximum sway position, or when the links are unhooked from the implement.

Shims can be removed or installed by removing the two bolts that hold the shims in place.

Tractors are shipped from the factory with approximately 25.4 mm (1″) shim packs installed.

1

2

Figure 2-193

1

2

Figure 2-194

1

Figure 2-195

2-140