Buhler 2425, 2335, 2290, 2375, 2360 manual Category Conversion, 143

SECTION 2 - OPERATION

Category Conversion

The hitch is shipped in the Category IV Narrow position. To convert the hitch to the Category III position (implement side), proceed as follows:

Remove the pin, 1, that attaches the lift link to the lower link by removing the klick pin and washer from inside the lower link.

1

Remove the lower links, 1, by removing the locking plate bolt, 2, and locking plate, 3. Remove the lower link attaching pin, 4, and bushing.

Turn the lower links end over end and attach the lower link to the tractor using pin, 4; locking plate, 3; and bolt, 2. Store the bushing on the storage pin.

Figure 2-201

2

3

4

1

Figure 2-202

Reattach the lift link to the lower link, using the rearmost hole on the lower link, with the klick pin and washer.

Repeat this procedure for the other side of the hitch.

Figure 2-203

2-143