Buhler 2375, 2335, 2425, 2290, 2360 manual Electronic Instrument Control System

SECTION 4 - TROUBLESHOOTING

ELECTRONIC INSTRUMENT CONTROL SYSTEM

PROBLEM	POSSIBLE CAUSE	CORRECTION
Lower portion of module	Tractor moving over 20 km/h	Normal operation. See Section 2 -
reverts to ground speed	(12.5 MPH).	“Normal Operation of the
automatically when		Electronic Instrument Control
monitoring other functions		System.”
Lower portion of display	Accrued hours approaching	Normal operation. See Section 2 -
flashes the service interval	(within 10 hours) or have reached	“Normal Operation of the
one or two indicator	preset service interval value.	Electronic Instrument Control
		System.”
Upper portion of module	System is in the calibrate mode.	Turn ignition switch to “OFF”
has the words “SET” and		position and back to “RUN” to
“UP” displayed and system		enter the normal operation mode.
functions erratically
Ground speed displayed on	Values entered into the calibrate	Recalibrate system. See
lower portion of module	mode are incorrect.	“Electronic Instrument Control
inaccurate (tractors less		System” in Section 2.
TPM option only)
Values displayed in lower	Units of measure are incorrect	Recalibrate system. See
portion of module are	(English or metric).	“Electronic Instrument Control
inaccurate		System” in Section 2.
Display is blank	Loss of +12V power.	Replace instrumentation fuse.
		Contact Buhler Versatile dealer.
Engine Warning Lights (Red	Critical (red) or non-critical	Contact Buhler Versatile dealer.
or Yellow) illuminated	(yellow) failure in electronic
	engine control circuit.
Engine Warning Light (red)	Engine overspeed.	Reduce engine speed (below
illuminated		2630 RPM)
Display flashed “EXT ALR”	Slip or time of day feature of TPM	See TPM in Section 2 of this
when turning or at certain	reacting.	manual.
times of the day (TPM
equipped tractors only)

4-14