Buhler 2360, 2335, 2425 Check the Starter Battery Connections, Clean the Engine Air Precleaner

SECTION 3 - LUBRICATION AND MAINTENANCE

EVERY 500 HOURS

OPERATION 38

Check the Starter Battery Connections

Check to be sure that the battery cable connection, 1, and the ground connection, 2, are tight and clean where they attach to the engine starter. Clean and tighten as necessary.

The starter is located on the left side of the engine.

WARNING: DISCONNECT THE BATTERY CABLES AT THE BATTERY BEFORE WORKING ON THE BATTERY CABLE CONNECTIONS AT THE STARTER.

OPERATION 39

Clean the Engine Air Precleaner

The engine air precleaner must be checked to be sure that debris is not causing any obstruction at the precleaner inlet.

To inspect the inlet to the precleaner, loosen the hose clamp, 1, attaching the air cleaner tube, 2, to the rubber boot, 3. Loosen the hose clamp, 4, attaching the boot to the precleaner, 5.

(2360 - 2425 models illustrated).

		1
2
		Figure 3-59
1	3	4
		5
2
		Figure 3-60

3-44