Buhler 2360, 2335, 2425, 2290, 2375 manual 151

SECTION 2 - OPERATION

5.Raise the hitch to the full up position using the manual raise/lower switch.

6.Set the rotary depth control knob to 10 (fully raised position).

7.Press the auto raise/lower switch, 1, to place the hitch in the automatic mode. The light will come on to indicate automatic mode operation. Start the tractor and implement down through the field and use the rotary depth control knob to control the height of the implement. Once the working depth is reached, the hitch will automatically keep the implement at the preset depth unless the depth is changed by the operator using the rotary depth control knob.

8.Use the auto raise/lower switch to raise the hitch at the end of the field or row.

Press the top of the switch to fully raise the hitch. Make the turn with the tractor and start down the field. Press the bottom of the switch to return the implement to the preselected working depth.

9.Use the manual raise/lower switch to raise or lower the hitch manually. The hitch will stop when the switch is released. The manual raise/lower switch will override the automatic mode and place the hitch to manual.

IMPORTANT: The auto switch must be depressed to resume auto operation.

Pressing the lower portion of the auto raise/lower switch will resume auto operation and position the hitch to the height preset with the rotary depth control knob, regardless of the current hitch position. Pressing the top of the auto raise/lower switch will also resume auto operation, and the hitch will raise to the highest position.

1

Figure 2-216

2-151