Buhler 2375, 2335, 2425, 2290, 2360 manual Open

SECTION 4 - TROUBLESHOOTING

PROBLEM	POSSIBLE CAUSE	CORRECTION
Tractor runs for a short time	Automatic shutdown mode	Check audio and visual indicators
and shuts off	activated.	for cause of shutdown. Contact
		Buhler Versatile dealer.
	Partially restricted fuel line.	Contact Buhler Versatile dealer.
Electronic monitor rotary	Open circuit on rotary select	Reconnect plug on back of switch.
select switch failure (“SEL”	switch for electronic instrument	Replace faulty switch.
“OPEN”)	control system.
Transmission speed sensor	Malfunction in sensor or sensor	Sensor is unplugged, reconnect.
“OPEN” or “SHCR”	wiring.	Sensor wiring is damaged, repair
		wiring.
		Contact Buhler Versatile dealer.
Engine speed sensor	Malfunction in sensor or sensor	Sensor is unplugged, reconnect.
“OPEN” or “SHCR”	wiring.	Sensor wiring is damaged, repair
		wiring.
		Contact Buhler Versatile dealer.
Electrical system high/low	Loose or corroded terminal	Clean and tighten connections.
voltage	connections.
	Shorted out electrical system.	Contact Buhler Versatile dealer.
	Sulfated batteries.	Check each battery open circuit
		voltage for 12.6 volts minimum.
		Check electrolyte level and
		specific gravity.
	Loose or worn belt.	Check alternator belt tension.
		Replace belt if required.
Batteries will not charge	Loose or corroded terminal	Clean and tighten connections.
	connections.
	Sulfated batteries.	Check each battery open circuit
		voltage for 12.6 volts minimum.
		Check electrolyte level and
		specific gravity.
	Loose or worn belt.	Check alternator belt tension.
		Replace belt if required.

4-9