Buhler 2290, 2335, 2425, 2375, 2360 manual Operation

SECTION 2 - OPERATION

When the service interval two position is selected, the lower half of the display will show a “service two” symbol and the hours accumulated since the last service was performed on the tractor. If the user presses the acknowledge/reset button, the lower half of the display will show the setting at which service interval two has been programmed. Pushing the acknowledge/reset button again will return the display back to the accumulated hours for service interval two.

NOTE: If the rotary select switch is in any other position except “Service Interval Two,” the service interval two symbol will flash in the lower portion of the monitor when the accumulated hours on the tractor are within ten hours of the preset interval. This alerts the operator that service interval two maintenance will be required in ten hours or less.

Tractor Accumulated Hours - The tractor accumulated hours position on the rotary select switch has two functions:

Function one is to show total tractor hour usage. The lower half of the display will show a whole number (without tenths) and an hourglass symbol in the lower right corner. This display of a whole number will remain on the lower portion of the monitor for ten seconds any time the rotary select switch is turned from any of the other five positions available or if the tractor is in the tractor accumulated hour position and the tractor is started. The highest whole number possible to accumulate on total tractor hours is 19999. Once this value is reached, the display will reset to zero.

Figure 2-89

Figure 2-90

2-59