AMX NI-2100, NI-4100, NI-3100 manual IR/Serial Port Connections and Wiring

Connections and Wiring

IR/Serial Port: Connections and Wiring

You can connect up to eight IR- or Serial-controllable devices to the IR/Serial connectors on the rear of the NI-4100 and NI-3100 and up to four on the NI-2100 (FIG. 19).

These connectors accept an IR Emitter (CC-NIRC) that mounts onto the device's IR window, or a mini- plug (CC-NSER) that connects to the device's control jack. You can also connect a data 0 - 5 VDC device.

These units come with two CC-NIRC IR Emitters (FG10-000-11).

NI-2100 IR/Serial connector	NI-4100/NI-3100 IR/Serial connector
configuration (Port 5-8)	configuration (Port 9-16)

FIG. 19 IR/SERIAL (male)

The IR/Serial connector wiring specifications are listed in the following table.

IR/Serial Connector Wiring Specifications (per Port)

Number of	NI-4100/3100	NI-2100	Signal	Function
IR connections	Port #	Port #
1	9	5	GND (-)	Signal GND
			Signal 1 (+)	IR/Serial data
2	10	6	GND (-)	Signal GND
						1 2	3	4 5	6	7 8
			Signal 2 (+)	IR/Serial data
3	11	7	GND (-)	Signal GND
			Signal 3 (+)	IR/Serial data
4	12	8	GND (-)	Signal GND
			Signal 4 (+)	IR/Serial data
5	13	N/A	GND (-)	Signal GND
			Signal 5 (+)	IR/Serial data
					1 2		3	4 5	6	7 8
6	14	N/A	GND (-)	Signal GND
			Signal 6 (+)	IR/Serial data
7	15	N/A	GND (-)	Signal GND
			Signal 7 (+)	IR/Serial data
8	16	N/A	GND (-)	Signal GND
			Signal 8 (+)	IR/Serial data

NetLinx Control Card Slot Connector (NI-4100 only)

FIG. 20 shows the 20-pin (male) connector that provides connection to the NetLinx Control Cards.

SLOT 1

20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

FIG. 20 NetLinx Control Card 20-pin connector

28 NI-2100, NI-3100, NI-4100 Hardware Reference Guide