Connections and Wiring

Think of the PRD Mode (On) equating to a PC’s SAFE Mode setting. This mode allows a user to continue powering a unit, update the firmware, and download a new program while circumventing any problems with a currently downloaded program. Power must be cycled to the unit after activating/deactivating this mode on the Program Port DIP switch #1.

Working With the Configuration DIP Switch

1.Disconnect the power supply from the 2-pin PWR (green) connector on the rear of the NetLinx Integrated Controller.

2.Set DIP switch positions according to the information listed in theBaud Rate Settings on the Configuration DIP Switch andPRD Mode Settings tables.

3.Reconnect the 12 VDC-compliant power supply to the 2-pin 3.5 mm mini-Phoenix PWR connector.

Setting the CardFrame DIP Switch (NI-4100 Only)

Refer to the Setting the NetLinx Control Card Addresses (NI-4100 Only) section on page 14 for a detailed explanation on this process.

Program Port Connections and Wiring

The Integrated Controllers are equipped with a Program port located on the front of the unit. Use an RS232 programming cable to establish a connection between this Program port to your PC's COM port. This connection provides communication with the NetLinx Integrated Controller. Then you can download NetLinx programs to this on-board Master using the NetLinx Studio v 2.4 software program. Refer to the NetLinx Studio instruction manual for programming instructions. The following table shows the rear panel Program Port connector (male), pinouts, and signals.

Program Port, Pinouts, and Signals

Program Port Connector

Pin Signal

2RX

3TX

5GND

5

9

7

RTS

8

4

8

CTS

 

3

 

 

 

 

2

1 7

6

Male

When wiring the 422/485 connections, do NOT use pre-made 9-wire cable or connect the wire in the cable to any connection that will not be used by the DB9 serial port. Only use wiring that connects the needed pins.

20

NI-2100, NI-3100, NI-4100 Hardware Reference Guide

Page 24
Image 24
AMX NI-3100, NI-2100 manual Setting the CardFrame DIP Switch NI-4100 Only, Program Port Connections and Wiring

NI-2100, NI-3100, NI-4100 specifications

The AMX NI-4100, NI-2100, and NI-3100 are sophisticated, next-generation control systems designed to enhance the automation and management of audiovisual (AV) environments in various professional settings. These devices are built to streamline user interactions and improve overall efficiency in managing complex AV installations.

The AMX NI-4100 stands as one of the most robust solutions in this lineup, featuring a powerful processor that can handle intensive processing tasks seamlessly. With its impressive memory capacity, the NI-4100 supports large-scale installations, making it ideal for corporate environments, educational institutions, and large auditoriums. This device operates on the latest version of the AMX control system software, ensuring compatibility with existing AV equipment. It also incorporates advanced networking capabilities, allowing for integration with multiple devices over an Ethernet network. The NI-4100 is equipped with numerous I/O ports, including multiple serial and IR outputs, offering extensive connectivity options for controlling various devices.

The AMX NI-3100, while slightly less powerful than the NI-4100, offers many essential features for small to medium-sized applications. It is designed with a focus on user experience, boasting an intuitive interface that simplifies operation for users. The NI-3100 supports the powerful AMX programming environment, which enables easy customization and programming of the control system to suit specific needs. Like its counterpart, the NI-3100 offers robust networking options and is capable of handling multiple device integrations, but in a more compact form factor. This makes it an excellent choice for conference rooms, huddle spaces, and education sectors where expertise in AV handling is not always present.

The AMX NI-2100 is the most compact model in the series, tailored for environments where space and budget considerations are paramount. Despite its smaller size, the NI-2100 shares many core functionalities seen in its larger counterparts. It maintains essential control features and reliable performance, making it suitable for smaller installations such as breakout rooms or smaller classrooms. The NI-2100 supports the same programming environment, ensuring it can be integrated into existing AMX solutions without compatibility issues.

All three models leverage AMX's innovative technology, allowing for seamless integration with a diverse range of third-party AV devices, enhancing the capability and scalability of any AV installation. They are also designed with security protocols to protect against unauthorized access, ensuring that the AV environments remain secure. Overall, the AMX NI-4100, NI-3100, and NI-2100 represent a complete suite of control solutions for varying AV needs, proving to be versatile assets in the modern multimedia landscape.