HP V1910 manual Configuring global parameters of a stack

Task		Remarks
		Required
	Configuring stack	Configure the ports of the master switch that connect to member
	ports	switches as stack ports.
		By default, a port is not a stack port.
Configuring		Required
member	Configuring stack	Configure a port of a member switch that connects to the master switch
switches of a	ports	or another member switch as a stack port.
stack		By default, a port is not a stack port.
Displaying topology summary of a		Optional
stack		Display the information of stack members.
		Optional
		Display the control panels of stack members.
Displaying device summary of a stack		IMPORTANT:
		Before viewing the control panel of a member switch, you must ensure
		that the username, password, and access right you used to log on to the
		master switch are the same with those configured on the member switch;
		otherwise, the control panel of the member switch cannot be displayed.
		Optional
		Log in to the web interface of a member switch from the master switch.
		IMPORTANT:
Logging into a member switch from		Before logging into a member switch, you must ensure that the
the master switch		username, password, and access right you used to log on to the master

switch are the same with those configured on the member switch; otherwise, you cannot log into the member switch. You can configure them by selecting Device and then clicking Users from the navigation tree.

Configuring global parameters of a stack

Select IRF from the navigation tree to enter the page shown in a. You can configure global parameters of a stack in the Global Settings area.

33