Energy saving configuration
Overview
Energy saving allows you to configure a port to work at the lowest transmission speed, disable PoE, or go down during a specified time range on certain days of a week. The port resumes working normally when the effective time period ends.
Configuring energy saving on a port
Select Device Energy Saving from the navigation tree to enter the energy saving configuration page, as shown in a. You can select a port and configure an energy saving policy for the port.
a.Energy saving configuration page
2.Configuration items for configuring energy saving on a port
Item | Description | |
| Set the time period when the port is in the state of energy saving. | |
Time Range | IMPORTANT: | |
| ∙ Up to five energy saving policies with different time ranges can be configured on | |
| a port. | |
| ||
| ∙ Specify the start time and end time in units of 5 minutes, such as 08:05 to 10:15. | |
Sun through Sat | Otherwise, the start time will be postponed and the end time will be brought | |
forward so that they meet the requirements. For example, if you set the time range | ||
| ||
| to 08:08 to 10:12, however, the effective time range is actually 08:10 to 10:10. | |
|
| |
PoE Disabled | Disable PoE on the port. | |
|
|
113