Finisar Surveyor manual Refresh Options MQoS Window Management, Alarm Log Monitor Only

The Maximum Number of Completed Calls section allows you to set the maxi- mum number of completed calls that will be captured. When the number of completed calls reaches this number, the next completed call causes the earliest completed call to be deleted from all tables. Setting this value low reduces the system memory used for call analysis. A higher setting allows you to keep more call detail records.

The minimum number of calls is 2,000. The default value is 2,000 calls.

To create new windows, click on the radio button on the right. To refresh table views when windows are selected, select the radio button on the left. This option applies to call summary tables, the call detail window showing a single call, and channel tables.

Multi-QoS 11

Configuring Multi-QoS

The configuration performed from the Configuration tab is described below:

• Refresh Options (MQoS Window Management)

By default, Multi-QoS tables are refreshed when you re-open any window con- taining a table. However, there may be instances where you want to compare data in the same table at different times. For this purpose, Multi-QoS provides an option to create a new window each time you view the data.

•Set Maximum Number of Completed Calls

•Multi-QoS Alarms (Monitor Only)

The Multi-QoS Alarms... alarm button on the Configuration tab applies to real- time functions and can only be set in monitor mode. The button brings up the Current Module Alarms dialog box for setting or viewing Multi-QoS alarms.

Refer to Chapter 9 on Alarms for complete information on setting Multi-QoS alarms.

•Alarm Log (Monitor Only)

Press the Alarm Log button to view the log of all alarms.

•Protocol Type Timeout Value

This timeout value sets the time that Surveyor will spend trying to determine the protocol type (H.323, SCCP, or SIP) of the call. Surveyor has several algo- rithms to identify calls that may not conform exactly to one of the specific pro- tocol types or may have incomplete call information, such as a call started or stopped outside the window of packets that Surveyor is decoding. If Surveyor has tried to recognize the protocol for the time specified in this value and not been able to classify the call, the call is listed in the All Calls table as

UNKNOWN.

11-7