Finisar Surveyor manual Trap Settings for THGs

Surveyor

User’s Guide

Trap Settings for THGs

The stations to receive traps for a remote THGs can be established from the local host running Surveyor.

To set up trap destinations for a remote THGs device, select the THGs device in the Resource Browser and from the menu bar select Host → Alarms Settings → SNMP Trap settings. The SNMP Traps dialog box appears. Use the Community Settings area to add or delete communities. List all IP addresses for the community in the Trap Destinations area.

The community does not require read or write privileges to receive SNMP traps containing alarms. You can disable any community from receiving traps by setting the Disable radio button. When you click the Disable button for a community, all IP addresses set as Trap Destinations for the community are deleted. Figure 9-5 shows an example SNMP Trap Settings dialog box for a THGs host.

Figure 9-5. SNMP Trap Settings for THGs

9-12