Finisar Surveyor Filter Actions, Operator Buttons for Template Combinations Description, Not

Filter Design

Capture and Display Filters 7

Filter Creation

a test against incoming frames.

If the operation you try makes no sense in the context of creating a template combi- nation, the operation is not allowed. For example, an OR operator makes no sense after an AND operator. As another example, inserting a filter template immediately after another filter template makes no sense and the operation is not allowed.

The following table describes the buttons that are used as operators to create tem- plate combinations.

Table 7-3. Operator Buttons for Template Combinations

Button	Description
AND	Insert logical AND operator. The AND operator has a higher priority
	than the OR operator (i.e., will be interpreted first).
OR	Insert logical OR operator.
NOT	Insert logical NOT operator.
(	Insert Open Parentheses. Along with the closed parentheses, estab-
	lishes the ordering and interpretation of the operands.
	For example, MAC_Source_Address AND SMTP OR FTP is inter-
	preted differently from MAC_Source_Address AND (SMTP OR FTP).
)	Insert Closed Parentheses. Along with the open parentheses, estab-
	lishes ordering and interpretation of the operands.
Clear All	Clears the entire template combination box.
CE	Clears the Last Entry. Erases only the last operator or template added
	to the template combination.
Add Counter Condition...	Brings up a dialog box to create a counter condition. You specify a
	counter name and a value to test against. When you specify the counter
	condition and click the OK button, the counter condition will appear in
	the Template Combination box.
	See the section on Counter Conditions for more information on using
	counter conditions.

Filter Actions

The Filter Actions dialog box is accessed by pressing the Set Filter Actions and Cus- tom Counters button from the Filter Design window. Actions do not need to be set for simple filters. The Filter Actions dialog box allows you to refine the exact con- tents of the capture buffer that go beyond the filtering specified in the

window. The default setting is to capture the current packet and continue.

7-13