Finisar Surveyor manual SIP Call Field Descriptions Field Name

	Multi-QoS	11
	Field Descriptions for Call Details
	Table 11-9. SIP Call Field Descriptions
Field Name	Description
FID	Frame ID of the first frame from which the conversation was detected. The
	the frame ID of the first INVITE message.
Caller	SIP URL or other URI of the caller. The addr-spec in the “From” parameter.
Caller Name	Display name of the caller. The display name in the “From” parameter, if it
	exists.
Caller Tag	The tag of “From”, if it exists.
Caller Address	The IP address of the initiator of the call.
Start Time	Time at which the call was started, i.e. the time of the first INVITE message
	of the call.
Stop Time	Time at which the call was complete.
Setup Time (ms)	Time that was taken for the call to be setup. This is the duration from
	“INVITE” to the 180 or 183 (ringing) response if available, or to the 200
	response otherwise. If none of these responses are received, the field
	value is set to “Unknown”.
Call-ID	Globally unique ID to identify a SIP call.
Callee	SIP URL or other URI of the callee. The addr-spec in the “To” parameter.
Callee Name	Display name of the callee. The display name in the “To” parameter, if it
	exists.
Callee Tag	The tag of “To”, if it exists.
Callee Address	The IP address of the receiver of the call.
SIP Version	The version of SIP being used.
Response Code	The response code number from the callee.
Call Status	Status of the call. An active call has the status of “Setting up” or “Set up
	complete”, and a complete call has the status of “Set up failed”, “Aborted”,
	“Complete”.

11-23