Surveyor

User’s Guide

The steps used to create the filter template and load it to a resource are shown below:

1.Press the Clear Template button.

2.Press the Name button for Station Address 1. Select the address from the name table and click OK.

3.Press the Name button for Station Address 2. Select the address from the name table and click OK.

4.Pull down the Direction box and set the indicator to bi-directional (<->).

5.Be sure the Apply Conversation to Template check box is selected in the Add

Conversation to Filter Template area.

6.Press the Save Custom Template button.

7.Enter the name of the new filter template in the Add to Available Filter Templates dialog box. The name in the example is Station_7and_8_Conversation. The new filter template name appears in the

Custom_Templates section of the Available Filter Templates box.

8.Press the Add button to apply the filter template. The filter template appears in the Template Combination box.

9.Press the Load Filter button to load the filter to the resource.

10.You are now ready to start capture. The capture buffer will contain only the

packets that match the filter criteria. The filter criteria includes the templates shown in the Template Combination box and the packet types selected in the lower portion of the FILTER CREATION box.

7-24

Page 160
Image 160
Finisar Surveyor manual